DEWALT Power-Stud 7420SD1 Wedge Anchor, 1/2 in Dia, 2-3/4 in OAL, Carbon Steel, Zinc
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Consistent performance in high and low strength concrete
- Length ID code and identifying marking stamped on head of each anchor
- Nominal drill bit size is the same as the anchor diameter
Description
Specifications
UNSPSC Code
20.203.203
Weight
9.2lb
Height
3.5in
Width
4in
Length
10.75in
Brand
DeWalt
Category
Anchors
Diameter
1/2 in
Finish
Zinc
Includes
(50) Wedge Anchors
Material
Carbon Steel
Maximum Work Thickness
2-3/4 in
Minimum Embedment Depth
2-1/4 in
Overall Length
2-3/4 in
Shear Strength
4195 lb
Tensile Strength
4500 lb
Thread Length
1 in
Thread Size
1/2-13
Thread Type
UNC
DEWALT Power-Stud 7420SD1 Wedge Anchor, 1/2 in Dia, 2-3/4 in OAL, Carbon Steel, Zinc
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Consistent performance in high and low strength concrete
- Length ID code and identifying marking stamped on head of each anchor
- Nominal drill bit size is the same as the anchor diameter