Simpson Strong-Tie H3 Hurricane Tie, 4-5/8 in L, 1-9/16 in W, Steel, Galvanized, Fastening Method: Nail
- Approved for installation with load-rated Strong-Drive® SD connector screws
- Galvanized (G90) for extra corrosion resistance
- Hurricane ties do not replace solid blocking
- Provides a connection between the rafter or truss and the wall of the structure that helps resist wind and seismic forces
- Use also for a variety of connections where one member crosses another
- When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind
Description
Specifications
UNSPSC Code
25.257.257
Weight
0.11lb
Height
6.5in
Width
8in
Length
10.5in
Brand
Simpson Strong-Tie
Category
Joist Hangers & Connectors
Fastening Method
Nail
Finish
Galvanized
Length
4-5/8
Material
Steel
Material Gauge
18 ga
Resists
Corrosion
Width
1-9/16
Simpson Strong-Tie H3 Hurricane Tie, 4-5/8 in L, 1-9/16 in W, Steel, Galvanized, Fastening Method: Nail
- Approved for installation with load-rated Strong-Drive® SD connector screws
- Galvanized (G90) for extra corrosion resistance
- Hurricane ties do not replace solid blocking
- Provides a connection between the rafter or truss and the wall of the structure that helps resist wind and seismic forces
- Use also for a variety of connections where one member crosses another
- When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind